Nexo GEO D - Manual (Page 62)

Page 62/97 GEO D RIGGING PROCEDURE
IMPORTANT
Ensure angle settings are identical on both sides of the cabinet.
5.7.4 Subsequent GEO SUB’s
• Repeat the above section steps, until all GEO SUB’s are in place. As the assembly is lifted,
angles between GEO SUB’s cabinets will remain at 0° whatever the linking bar positions.
• NB : angle settings are free to be adjusted while the system is clear of the ground, provided that
rear pull-up force is not applied.
« SAFETY PIN MUST BE FITTED »
HOLE