Nexo GEO D User Manual
Page 42
Page 42/97
GEO
D
RIGGING PROCEDURE
CONNECTING FRONT, REAR MOTORS AND CHAIN LEVEL HOIST
5.5.2 Bumper to first GEO D10 assembly
IMPORTANT
GEO D10 can be flown “Left” or “Right” :
- “Left” means Nexo logo on front grid is left as seen from front;
- “Right” means Nexo logo on front grid is right as seen from front.
GEO D10 can be connected to bumper “Left” or “Right” by simply flipping the cabinets
upside down: do not reverse rigging plates
Whenever possible, NEXO recommends symmetrical designs (preferably NEXO logo
inwards in stereo configurations)
‘’LEFT’’
CONFIGURATION
’’RIGHT’’
CONFIGURATION
4 push-pins (BLGEOD, 10mm diameter x 20 mm length) connect the top GEO D10 to the bumper.