Product description, Motor, Pump – Stuart Turner TFL Automatic Flow Switch User Manual

Page 3

- 3 -

WARNING AGAINST MISUSE



This pump set must not be used for any other application without the

written consent of Stuart Turner Limited and, in particular, must not be

connected directly to the mains water supply or used outside the

conditions specified in the limits of application.



This appliance is not intended for use by persons (including children

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that they do not play with the

appliance.

PRODUCT DESCRIPTION

Electric motor driven pump complete with automatic control system consisting of flow

switches and electronic controls.

Motor

Induction type, totally enclosed fan ventilated cooling*, class ‘F’ insulation, permanent

capacitor, complying with BS5000 or IEC34-1. All models have integral auto resetting
thermal overload protection.

The standard range of motors are suitable for a supply of 230V, 1 phase, 50Hz.
Optional motors are available on certain models to suit various voltages and frequencies

(see technical specification for details).

*Variations of rating and enclosure details can be found in the technical specification

section.

Pump

All models are close coupled to motor.
RGFL range are of single stage, peripheral design, with vertical suction and discharge

ports.

RGDFL6000 consists of twin pump heads situated at each end of the motor. The pump

design is of the single stage, peripheral design, with vertical suction and discharge ports.

ESFL range are of single stage, end suction, peripheral design.
KFL range are of single stage, end suction, centrifugal design.
LFL range are of four stage, end suction, centrifugal design.
TFL range are of two stage, end suction, centrifugal design.
Standard pump materials of construction of major wetted parts are as follows:-

Model

Body

Impeller

Shaft

Mechanical Seal

RGFL range

Brass

Stainless Steel