Stuart Turner Kennet 2 - Manual (Page 4)

- 4 -
Cont ...
Stuart Turner reserve the right to amend the specification in line with its policy of
continuous development of its products.
Note: For information on other voltages/frequencies which are not shown, consult any
supplementary instruction sheet supplied, or the rating label attached to the
pump.
TECHNICAL SPECIFICATION
Model Supply Impeller
Material Nominal
Watts
Output
(Motor)
Max. Watts
consumed
at full flow
Full
Load
(AMPS)
Enc.
Rating
Dims (mm) Gross
Weight
(packed)
kg
No. of
Pump
Stages
L W H
K7-2 230/1/50 Plastic 180 230 1 IP44 237 131 180 6.1 1
K9-2 230/1/50 Plastic 250 330 1.5 IP44 242 131 180 6.3 1
K9-2 230/1/50 Brass 250 350 1.6 IP44 242 131 180 6.3 1
K9-2 400/3/50 Plastic 250 370 0.85 IP44 288 133 166.5 6.3 1
K12-2 230/1/50 Plastic 500 595 2.8 IP44 277 131 180 8.2 1
K12-2 230/1/50 Brass 500 635 2.9 IP44 277 131 180 8.2 1
K12-2 400/3/50 Plastic 500 610 1.1 IP44 288 133 166.5 6.3 1
T6-2 230/1/50 Plastic 650 890 3.9 IP55 326 210 214 8.2 2
T12-2 230/1/50 Plastic 820 1140 5.2 IP55 350 210 214 9.4 2
L5-4S 230/1/50 Plastic 600 925 4.1 IP55 400 202 214 9.8 4
L7-4S 230/1/50 Plastic 760 1075 4.9 IP55 424 202 214 10.8 4
X201 230/1/50 Plastic 670 930 4.1 IP55 375 205 255 9.6 1