Stuart Turner Kennet 2 - Manual (Page 10)

- 10 -
Cont ...
Supply Cord Extension (Thame, Loddon and X201 range)
If the supply cord of the pump needs to be extended use the same specification as fitted
to the product.
Thame, Loddon and X201 range:- . . . . . . . . HO7RN-F3 G 1 mm², 10 Amp rating.
Use an appropriate cable connector suitable for the cable specified, current involved and
surrounding conditions.
Fuses
The following table gives the recommended fuse size for pump models fitted with a
power cord at the factory.
For all models not listed, the power cord must be sourced and supplied by the installer.
Cable selection and fuse size should be based on the motor full load current and the
surrounding conditions.
Model Fuse Size (AMPS)
Thame 13
Loddon 13
X201 13