Yokogawa Removable Chassis DX1000N - Manual (Page 6)

IM 04L41B01-03E
Improvement to the Display Group Setup Operation
The channel settings of a display group can be copied to another group.
Setup Screen
Press MENU (switch to the setting mode) and select Group set, Trip line
Procedure
1. Select the copy source channel settings.
2. Press the Copy soft key.
3. Select the copy destination channel settings.
4. Press the Paste soft key. The channel settings are copied.
Section 5.1, “Setting Display Groups” in the user’s manual
Specifying the Base Position of the Bar Graph
The base position of the bar graph can be set to span lower limit (scale lower limit) or
span upper limit (scale upper limit). The setting is applied when displaying the bar graph
and when displaying the current value on the scale using the bar graph.
Setup Screen
Press MENU (switch to the setting mode) and select Meas channel > Bar Graph
Operations on the DX1000/DX1000N/DX2000