Yokogawa Removable Chassis DX1000N - Manual (Page 13)

13
IM 04L41B01-03E
Status Display of the CF Card
• If an error occurs on the CF card, the CF card icon in the status display section
changes to an error display.
An error occurred while accessing the CF card.
(White)
(Light blue)
Detected an error when the CF card was inserted or performed
a key operation to eject the CF card when an error was occurring
while the CF card was being accessed.
• If the media FIFO is turned ON, the icon does not turn red even when the free space
on the CF card falls below 10% of the total CF card size.
Section 1.3, “Display” in the user’s manual
E-mail Transmission of CF Card Errors
• An e-mail message can be sent when an error occurs on the CF card.
• If the media FIFO is turned ON, an e-mail message is not sent even when the free
space on the CF card falls below 10% of the total CF card size.
To send e-mail message of CF card errors, set the DX to send a system mail.
Setup Screen
Press MENU (switch to the setting mode), hold down the FUNC key for 3 s (switch
to the basic setting mode), and select Communication (Ethernet) > E-mail
Section 1.4, “Sending E-mail Messages” in the communication interface user’s manual
Relay Contact Output When a CF Card Error Occurs (/F1 and /F2 Options)
A relay contact output can be activated when an error occurs on the CF card.
Setup Screen
MENU key (switch to the setting mode) > Hold down the FUNC key for 3 s (switch
to the basic setting mode), and select
Status Relay
Setup Items
Memory/Media status
Select On.
Section 2.9, “Outputting the DX Status via the Relay Contact” in the user’s manual
Operation When a CF Card Error Occurs
Carry out the procedure below to reset the CF card icon to normal and release the relay
output.
• Replace the CF card with a normal one.
• Format the CF card on the DX.
Operations on the DX1000/DX1000N/DX2000