Yokogawa Removable Chassis DX1000N - Manual (Page 14)

14
IM 04L41B01-03E
Progress Display When Saving All Data of the Internal Memory
If you carry out All Save* on the memory summary screen, a pop-up window appears
showing the progress of the save operation.
* Function for saving all data in the internal memory to a CF card or USB flash memory.
Note
• The pop-up window appears only when the memory summary display is showing.
• If you press the ESC key, the pop-up window clears temporarily and reappears
approximately 10 seconds later.
• The time estimate for saving all data is indicated in the table below (when the memory is full
of data). It may take longer depending on the operating conditions of the DX.
Time to Save All Data (Estimate)
Save Destination CF Card USB Flash Memory
Standard memory (internal memory size suffix code -1) 4 minutes 16 minutes
Expansion memory (internal memory size suffix code -2) 10 minutes 40 minutes
Section 4.8, “Using the Memory Summary” in the user’s manual
Changing the Initial Display Selection Menu
SELECT SAVE and ALL SAVE are shown in the initial display menu.
Section 4.8, “Using the Memory Summary” in the user’s manual
Section 5.17, “Changing the FUNC Key Menu and Display Selection Menu” in the user’s
manual (section 5.18 for the DX2000)
Improvement to the Data Save Operation to the USB Flash Memory
Save data is displayed only when a flash memory is connected to the USB port and is
usable* in the operation mode.
* If DX is configured so that any of the items below is shown in the display menu, Save data
can be executed. You can change the items shown in the display menu using the menu
customize function.
SELECT SAVE , M.SAMPLE SAVE , REPORT SAVE , or ALL SAVE
Section 2.12, “Using the USB Flash Memory (/USB1 Option)” in the user’s manual
Section 5.17, “Changing the FUNC Key Menu and Display Selection Menu” in the user’s
manual (section 5.18 for the DX2000)
Retaining the State of the CapsLock and NumLock Keys on the USB Keyboard
The state of the CapsLock and NumLock keys is retained even if you disconnect the
USB keyboard.
Section 2.11, “Controlling the DX with a Keyboard (/USB1 Option)” in the user’s manual
Operations on the DX1000/DX1000N/DX2000