Yokogawa In-Situ Gas Analyzer TDLS200 - Manual (Page 8)

1-1 <1 INSTRUMENT CHECK>
Make sure the model number on the
nameplate of the instrument agrees with your
order.
The nameplate will also contain the serial
number and any relevant certifi cation marks.
Be sure to apply correct power to the unit, as
detailed on the nameplate.
For products used within the European
Community or other countries requiring the CE
mark and/or ATEX classifi cation, the following
labels are attached (as appropriate):
1 INSTRUMENT CHECK
Upon delivery, unpack the instrument carefully and inspect it to ensure that it was not damaged during
shipment. If damage is found, retain the original packing materials (including the outer box) and then
immediately notify the carrier and the relevant Yokogawa sales offi ce.
For Zone 2 (CAT 3) ATEX use the following labels will be attached as appropriate:
IM 11Y01B02-11E-A 5th Edition :June 5, 2012-00