Yokogawa EJA530E - Manual (Page 50)

<9. General Specifications>
9-10
IM 01C25F01-01E
9.4 Dimensions
 Model EJ510, EJ530, EJX610A and EJX630A
54
(2.13)
6
(0.24)
5(0.20)
24(0.94)
ø6
(0.24)
172 (6.77)
60(2.36)* 2
12* 3
(0.47)
126(4.96) 165 (6.50)
95(3.74)
Mounting bracket
(optional)
(optional)
Extenal indicator
Conduit connection
Integral indicator
(optional)
188(7.40)
110(4.33)
129(5.08)
12
(0.47)
110(4.33)
39
(1.54)
ш70 (2.76)
ш78(3.07)
Conduit connection
Zero
adjustment
Ground terminal
Open to
atmosphere* 1
Shrouding bolt* 4
2-inch pipe
(O.D. 60.5 mm)
156 (6.14)
 With Process connections code 7
 With Process connections code 4
 With Process connections code 8 and 9
*1: Only for EJ530 and EJX630A whose measurement span code is A, B, or C.
*2: 58 mm(2.28 inch) for measurement span code D.
*3: 11 mm(0.43 inch) for measurement span code D.
*4: Available only when specifying the option code including ATEX, IECEx or TIIS flameproof type.
159(6.26)
Electrical connection
for code 5, 9, A, and D.
F0904.ai
Unit: mm (approx. inch)
SUPPLY
CHECK
or
ALARM
+
–
+
–
 Terminal Configuration
Power supply and output terminal
External indicator (ammeter) terminal *5*6
or
Status contact output terminal *6
(when /AL is specified)
Ground terminal
Communication
terminals (BT200 etc.)
connection hook
 Terminal Wiring
*5: When using an external indicator or check meter, the internal
resistance must be 10 Ω or less. A check meter or indicator
cannot be connected when /AL option is specified.
*6: Not available for fieldbus and PROFIBUS communication types.
Check meter
connection hook *5*6
SUPPLY +
SUPPLY –
CHECK – or ALARM –
CHECK + or
ALARM +
+
–
F0905.ai