Watlow Series 96 Calibration Manual, 1/16 DIN Temperature Controller - Manual (Page 11)

Active if output 4 is process (96 _
_- _ _ _ M -_ _ _ _) and Calibra-
tion Lock (Lockout Menu) is not
set to [hide].
1622 w 10.00 (1000) 0.00 to 99.99 [4`10] Output Calibra-
tion 4, 10V
Enter the output
value in volts as
measured.
Active if output 4 is process (96 _
_- _ _ _ M -_ _ _ _) and Calibra-
tion Lock (Lockout Menu) is not
set to [hide].
1621 w 1.00 (100) 0.00 to 99.99 [4``1] Output Calibra-
tion 4, 1V
Enter the output
value in volts as
measured.
Active if output 4 is process (96 _
_- _ _ _ M -_ _ _ _) and Calibra-
tion Lock (Lockout Menu) is not
set to [hide].
1620 w 20.00 (2000) 0.00 to 99.99 [4`20] Output Calibra-
tion 4, 20mA
Enter the output
value in milliamps
as measured.
Wa t l o w S e r i e s 9 6 C a l i b r a t i o n ■ 1 1
Display Parameter Range Default Modbus Conditions for
(Modbus Value) Address Parameters to Appear
Read/Write
Ordering Information
(1551)
Series 96 9 6 — — – — — — — – — — — —
Microprocessor-based
1 / 16 DIN with universal input 1.
Options include software, power supply,
input 2, four outputs and display color
Power Supply
A
= 100-240V ı (ac/dc)
B = 24-28V ı (ac/dc)
Input 2
0
= None
1 = Event input & 0-5V Î (dc)/
4-20mA (remote set point input)
Output 1
C
= Switched dc/open collector
D = Electromechanical relay, Form C,
2A, without RC suppression
F = Universal Process, range selectable: 0-20mA,
4-20mA, 0-5V Î (dc), 1-5V Î (dc), 0-10V Î (dc)
K = 0.5A solid-state relay without
RC suppression
Output 2
A
= None
C = Switched dc output/open collector
D = Electromechanical relay, Form C, 2A, without RC suppression
F = Universal Process, range selectable: 0-20mA,
4-20mA, 0-5V Î (dc), 1-5V Î (dc), 0-10V Î (dc)
K = 0.5A solid-state relay without
RC suppression
Output 3
A
= None
D = Electromechanical relay, Form C, 2A, without RC suppression
Output 4
A
= None
D = Electromechanical relay, Form C, 2A, without RC suppression
R = 232 Communications
U = 485 Communications
M = Universal Retransmit, range selectable: 0-20mA,
4-20mA, 0-5V Î (dc), 1-5V Î (dc), 0-10V Î (dc)
Software/Preset Parameters
00
= Standard software
AA = Ramping
Display/Overlay
Upper/Lower
RR = Red/Red display GR = Green/Red display
RG = Red/Green display GG = Green/Green display