Proface FP3900 - 19 Flat Panel" - Manual (Page 66)

Chapter 6 Setting up and Adjusting the FP unit
6-9
Resets all the settings and then returns to the top menu.
Cancels the setting and then returns to the top menu.
Switches Analog RGB and DVI-D, and quits the OSD
Cancels the setting and then returns to the top menu.
All Reset
Input Source
Applies the setting and then returns to the top menu.
Cancels the setting and then returns to the top menu.
Applies the setting and then returns to the top menu.
Cancels the setting and then returns to the top menu.
Auto Adjust (Analog RGB only)
Auto Gain (Analog RGB only)
• Be sure to perform the auto adjust while things except the
black are displayed on the edge of the screen.
• Be sure to perform the auto gain control when the screen
has both 100% black and 100% white areas displayed.
Icon decision
Icon selection
Saves the setting and quits the OSD.
End of OSD
Saves all the adjusted settings in the EEPROM.