Proface FP3900 - 19 Flat Panel" - Manual (Page 6)

5
Connecting the FP to a PC
The FP-3710K Series is designed for the following resolutions.
Be aware that some types of devices for image signal output may not be within the ranges specified in this document, and,
therefore, cannot be connected to the FP.
Also, if you change your PC’s Analog RGB/DVI-D board, there is the possibility that the new board may not be able to be
connected to the FP.
Series Full Resolution
FP-3710K Series 1024
×
768
SEE
4.1.3 Interface Specifications (page4-5)
• When a signal timing value not compatible with this device is entered, or if the
entered timing is larger than can be displayed by the dot clock, an “Out of range”
message is displayed. If this occurs, be sure to read your computer’s manual
and enter a value that is compatible with this device.
• If no signal (synchronized signal) is entered, a “No signal” message is displayed.