Maple Systems PC110CF - Manual (Page 8)

5 PC100 Series Operation Manual
1010-1022 Rev. 01
FCC Class A Rating
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy. If not installed and used in accordance with this user’s manual, it may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own expense.
Environmental Considerations
The PC100 Series is designed to operate in temperatures from 0-40° C. It is intended for indoor installations and
not designed for outdoor applications. Avoid installing the PC100 Series in environments with severe mechanical
vibration or shocks. Do not install the computer in enclosures with rapid temperature variations or high humidity.
Either will cause condensation of water inside the device and eventual damage to the computer.
Safety Precautions
Please observe the following precautions when installing the PC100 Series Panel PCs. Failure to comply with
these restrictions could result in loss of life, serious personal injury, or equipment damage.
Warning: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries according to
manufacturer instructions.
Warning: Some of the internal parts of the system may have high electrical voltage. We
strongly recommend that qualified engineers open and/or disassemble the unit.
Warning: Disconnect this equipment from any AC outlet before cleaning. Do not use liquid
or spray detergents for cleaning. Use a damp cloth.
Warning: Keep this equipment away from humidity.
Warning: The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
Warning: Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
Warning: Position the power cord so that people cannot step on it. Do not place anything
over the power cord.