Ramsey Winch RPH-35000 W/ 2 SPEED MOTOR - Manual (Page 8)

3. Remove brake assembly screws (item #16) from brake (item #33a) to access (2) mounting screws (item #20)
attaching brake adapter plate (item #33d) to end bearing (item #9). CAUTION: Brake is spring loaded by
clutch spring and must be restrained against end bearing as mounting screws (item #20) are
removed. Remove coupling (item #7) and gasket (item #33e) from end bearing. Take note of mounting con-
figuration for proper mounting of parts during re-assembly.
4. Remove winch from upright mounting frame (item #2) by removing (8) capscrews (item #18), (8) lockwashers
(item #24) and (4) shoulder bolts (item #28). Pull motor end bearing (item #9) from drum assembly (item
#1).
7
33c
33a
33e
33d
33e
20
20
47
47
6