Ramsey Winch HDG-350 (JERR-DAN) {CURRENT} - Manual (Page 5)

5
WARNINGS
CLUTCH MUST BE TOTALLY ENGAGED BEFORE STARTING THE WINCHING
OPERATION.
DO NOT DISENGAGE CLUTCH UNDER LOAD.
STAY OUT FROM UNDER AND AWAY FROM RAISED LOADS.
STAND CLEAR OF CABLE WHILE PULLING. DO NOT TRY TO GUIDE CABLE.
DO NOT EXCEED MAXIMUM LINE PULL RATINGS SHOWN IN TABLE.
DO NOT USE WINCH TO LIFT, SUPPORT, OR OTHERWISE TRANSPORT PEO-
PLE.
A MINIMUM OF 5 WRAPS OF CABLE AROUND THE DRUM BARREL IS NEC-
ESSARY TO HOLD THE LOAD. CABLE SETSCREW IS NOT DESIGNED TO
HOLD LOAD.
DO NOT USE WINCH AS A TIE DOWN. DO NOT MAINTAIN LOAD ON WINCH
CABLE DURING TRANSIT.