Ramsey Winch HDG-350 (JERR-DAN) {CURRENT} - Manual (Page 4)

RAMSEY WINCH MODEL HDG-350 RAM-LOK ®
PLEASE READ THIS MANUAL CAREFULLY.
This manual contains useful ideas in obtaining the most efficient operation from
your Ramsey Winch, and safety procedures one needs to know before operating
a Ramsey Winch.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifications. Great care
and skill go into every winch we make. If the need should arise, warranty pro-
cedure is outlined on the back of your self-addressed postage paid warranty
card. Please read and fill out the enclosed warranty card and send it to Ramsey
Winch Company. If you have any problems with your winch, please follow
instructions for prompt service on all warranty claims. Refer to back page for
limited warranty.
SPECIFICATIONS: CONFORMS TO SAE J706
NOTE: The rated line pulls shown are for the winch only. Consult the
wire rope manufacturer for wire rope ratings.
Rated Line Pull (lbs.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10,000
(kg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4,536
Gear Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30:1
Weight (without cable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110lbs. (50 kg)
Duty Cycle (ft.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
LAYER OF CABLE 1 2 3 4**
*Rated line pull lbs. 10,000 8,100 6,900 4,800
per layer kg 4,536 3,670 3,120 2,180
*Cable capacity ft. 20 50 85 125
m 6 15 25 37
*Line speed FPM 32 38 44 54
(at 15 GPM) MPM 9,7 11,5 13,3 16,4
*These specifications are based on recommended wire rope of 7/16 inch
diameter extra improved plow steel or equivalent.
**Does not conform to SAE J706 specifications.
4