Ramsey Winch RPH 50000 UW/TNR & 2 SPEED MOTOR - Manual (Page 14)

12. If removed, install bushing #14 into gear housing #10. Press bushings #30 into each end of output
coupling #8. Place end (with longest splines) of output coupling #8 through end bearing bushing
#14 and mesh coupling spline with spline inside of drum. Slide shaft coupling #6 into output
coupling #8. Place shifter shaft #12 through washer #27 and into shaft coupling #6, meshing
splines of shifter shaft with splines in shaft coupling.
LONGEST SPLINES
8
10
12
27
30
6
14
30
12