Ramsey Winch RPH 50000 UW/TNR & 2 SPEED MOTOR - Manual (Page 11)

RE-ASSEMBLY
9. NOTE: DETERMINE MOUNTING CONFIGURATION OF WINCH ( “A” ROTATION DRIVER SIDE
OR “B” ROTATION PASSENGER SIDE) BEFORE RE-ASSEMBLY OF WINCH, TO ASSURE
PARTS ARE MOUNTED TO PROPER SIDE. REFER TO WINCH MOUNTING
CONFIGURATIONS ON PAGE 16
.
Place gasket #35e into position on mounting surface of end bearing #9. Use (2) capscrews #19 to
attach brake adapter plate #35d to motor end bearing. Torque capscrews to 85 ft.-lbs. each.
Apply second gasket to other side of adapter plate. Attach brake assembly #35a to brake adapter
using capscrews #16. Torque capscrews to 97 ft.-lbs. each.
9
35
16
19
19
35e
35d
35e
35a
33
35c
16
9