Ramsey Winch RPH 50000 UW/TNR & 2 SPEED MOTOR - Manual (Page 13)

11. Seat well-oiled quad-ring #41 into groove of bushing in each end of drum assembly #1.
Carefully set drum assembly down onto motor end bearing #9. Lift gear end bearing #10 and
set into place on drum assembly. Attach tie bars #2 using (8) capscrews #17 and lockwashers
#24. Install (4) shoulder bolts #29 and hand tighten. Tighten (4) innermost capscrews securely,
check rotation of cable drum. Tighten (4) outer-most capscrews securely, check rotation of
cable drum. Torque capscrews, in innermost then outer-most pattern shown below, to 430 ft.-
lbs. each. Torque shoulder bolts to 30 ft-lbs. each. Check rotation of cable drum assembly. It
must rotate freely with no tight spots.
2
2
24 17
29
29
17 24
CAPSCREW
OUTER-MOST
29
29
17 24
OUTER-MOST
CAPSCREWS
INNER-MOST
CAPSCREW
11