Poly-Tex KOOL HOUSE - Manual (Page 10)

12"
60"
OPTIONAL ROLL-UP CURTAIN INSTRUCTIONS
EIGHT
REV: AC-120529 610573-1
KOOL HOUSE
WIGGLE WIRE
BASE
SIDE RAIL
INSTRUCTIONS
1. ATTACH ROLL FORM RAILS TO HOOPS USING UNI-CLAMPS.
2. BOTTOM RAIL IS ABOUT 12" UP FROM BOTTOM OF HOOP.
3. TOP RAIL IS 60" BETWEEN THE RAILS.
4. ATTACH WIGGLE WIRE BASE USING #12-14 x 3/4" SELF
DRILLING SCREWS SPACED ABOUT EVERY 12".
5. ATTACH SIDE RAIL USING STOP TABS, LOCK WASHERS
AND HEX NUTS. SIDE RAIL IS 12" FROM INSIDE EDGE OF
CORNER HOOP.
6. INSTALL POLY ON 12" LOWER SECTION.
7. INSTALL POLY BETWEEN END FRAME AND SIDE RAILS.
8. INSTALL END FRAME POLY.
SIDE RAIL
SIDE POLY
LOWER POLY
10 1/2"
UNI-CLAMP
#12-14 x 3/4" SELF
DRILLING SCREW
UNI-CLAMP
1/4" x 1/2" HEX
BOLT & HEX NUT
#12-14 x 3/4" SELF
DRILLING SCREW
VIEW FROM INSIDE OF STRUCTURE