Mr. Gasket All Throttle Enhancer - Manual

THROTTLE ENHANCER
INSTALLATION INSTRUCTIONS
1 . Before beginning installation, be sure the engine
compartment has cooled down sufficiently to work on vehicle.
2 . Refer to the vehicle manufacturer service manual to locate the
throttle position sensor on engine.
3 . Disconnect wire harness connector from the throttle
position sensor.
4 . Install Throttle Enhancer in-line between throttle position sensor
and wire harness, make sure connections snap into place.
Use tie-straps or convoluted tubing to secure or protect
electrical wires.
5 . Test drive vehicle, when throttle reaches 60%, throttle enhancer
changes the voltage signal to the ECU (electronic control unit),
advancing ignition timing and optimizing air/fuel ratio.
The result is faster throttle response.
6 . The throttle enhancer is 50 state legal.
©2000 Printed U. S. A.
Cleveland, OH
www.mrgasket.com
THROTTLE ENHANCER
INSTALLATION INSTRUCTIONS
1 . Before beginning installation, be sure the engine
compartment has cooled down sufficiently to work on vehicle.
2 . Refer to the vehicle manufacturer service manual to locate the
throttle position sensor on engine.
3 . Disconnect wire harness connector from the throttle
position sensor.
4 . Install Throttle Enhancer in-line between throttle position sensor
and wire harness, make sure connections snap into place.
Use tie-straps or convoluted tubing to secure or protect
electrical wires.
5 . Test drive vehicle, when throttle reaches 60%, throttle enhancer
changes the voltage signal to the ECU (electronic control unit),
advancing ignition timing and optimizing air/fuel ratio.
The result is faster throttle response.
6 . The throttle enhancer is 50 state legal.
©2000 Printed U. S. A.
Cleveland, OH
www.mrgasket.com
THROTTLE ENHANCER
INSTALLATION INSTRUCTIONS
1 . Before beginning installation, be sure the engine
compartment has cooled down sufficiently to work on vehicle.
2 . Refer to the vehicle manufacturer service manual to locate the
throttle position sensor on engine.
3 . Disconnect wire harness connector from the throttle
position sensor.
4 . Install Throttle Enhancer in-line between throttle position sensor
and wire harness, make sure connections snap into place.
Use tie-straps or convoluted tubing to secure or protect
electrical wires.
5 . Test drive vehicle, when throttle reaches 60%, throttle enhancer
changes the voltage signal to the ECU (electronic control unit),
advancing ignition timing and optimizing air/fuel ratio.
The result is faster throttle response.
6 . The throttle enhancer is 50 state legal.
©2000 Printed U. S. A.
Cleveland, OH
www.mrgasket.com
THROTTLE ENHANCER
INSTALLATION INSTRUCTIONS
1 . Before beginning installation, be sure the engine
compartment has cooled down sufficiently to work on vehicle.
2 . Refer to the vehicle manufacturer service manual to locate the
throttle position sensor on engine.
3 . Disconnect wire harness connector from the throttle
position sensor.
4 . Install Throttle Enhancer in-line between throttle position sensor
and wire harness, make sure connections snap into place.
Use tie-straps or convoluted tubing to secure or protect
electrical wires.
5 . Test drive vehicle, when throttle reaches 60%, throttle enhancer
changes the voltage signal to the ECU (electronic control unit),
advancing ignition timing and optimizing air/fuel ratio.
The result is faster throttle response.
6 . The throttle enhancer is 50 state legal.
©2000 Printed U. S. A.
Cleveland, OH
www.mrgasket.com