Mr. Gasket 9415 Valve Cover: Chevy SB 87-up Chrome User Manual

Mr. Gasket For the car

GENERAL INFORMATION

Mr. Gasket Chrome Plated Valve Covers are a direct

replacement for factory inner rail design valve covers on

1987 & up Chevrolet Small Block engines. Grommets

and oil filler cap are included.

INSTALLATION PROCEDURE

Step 1

Remove PCV valve(s), sir cleaner breather tube and

hold-down bolts from center of valve covers.

NOTE: It is

recommended to replace existing valve cover gas-

kets to ensure a positive seal. Use Mr. Gasket Part

No. 168 or 5867.

Step 2

Install provided grommets into valve covers and place

into cylinder heads. Two hole design fits driver’s side

and one hole design fits passenger side.

Step 3

Insert hold-down bolts into mounting holes, starting

with the two center bolts. Tighten to manufacturer’s

specifications.

NOTE: Use Mr. Gasket Part No. 9822 to

replace existing factory mounting hardware.

Step 4

Re-install PCV valve(s), air cleaner breather tube and oil

fill cap.

Step 5

Replace any auxiliary engine components that may have

been removed.

QUESTIONS

Please call our Tech Support line at 1-216-688-8300,

M – F, 9 – 5 EST. Please have the part number on hand

when you call.

INSTALLATION INSTRUCTIONS

CHROME PLATED VALVE COVERS – Mr. Gasket Part No. 9415

FORM 94152012

READ ALL INSTRUCTIONS CAREFULLY BEFORE BEGINNING INSTALLATION. MAKE SURE ENGINE, RADIATOR AND ALL COMPONENTS ARE COOL BEFORE

STARTING. NOTE: ON SOME APPLICATIONS, IT MAY BE NECESSARY TO REMOVE OR DISCONNECT VARIOUS AUXILIARY ENGINE COMPONENTS TO

PROVIDE CLEARANCE FOR VALVE COVER INSTALLATION.

MR. GASKET IS A TRADEMARK OF PRESTOLITE PERFORMANCE
10601 Memphis Ave. #12, Cleveland, OH 44144
216.688.8300 FAX 216.688.8306

FORM

94152012

06/12

Printed in U.S.A.