IEI Integration LCD-KIT Series v2.02 - Manual (Page 72)

LCD-KIT
Page 62
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the LCD-KIT Series.
B.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
B.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
ƒ Follow the electrostatic precautions outlined below whenever the LCD-KIT
Series is opened.
ƒ Make sure the power is turned off and the power cord is disconnected
whenever the LCD-KIT Series is being installed, moved or modified.
ƒ Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
ƒ Electric shocks can occur if the LCD-KIT Series chassis is opened when
the LCD-KIT Series is running.
ƒ Do not drop or insert any objects into the ventilation openings of the
LCD-KIT Series.
ƒ If considerable amounts of dust, water, or fluids enter the LCD-KIT Series,
turn off the power supply immediately, unplug the power cord, and contact the
LCD-KIT Series vendor.
ƒ DO NOT:
o Drop the LCD-KIT Series against a hard surface.
o Strike or exert excessive force onto the LCD panel.
o Touch any of the LCD panels with a sharp object
o In a site where the ambient temperature exceeds the rated temperature