Agilent Technologies USB/GPIB Interface Converter 82357A - Manual (Page 39)

Chapter 2 39
Using the 82357A
Setting Configuration Parameters
Setting Configuration Parameters
This section gives guidelines to change or set various configuration
parameters for the 82357A, including:
„ Changing Configuration Parameters
„ Changing Modes of Operation
„ Setting Timeout Floor Value
„ Setting High-Performance Operation
Changing Configuration Parameters
To change the VISA or SICL Interface ID or the LU or GPIB Address value,
or if you want to check the values, highlight the USB/GPIB interface in the
explorer view (tree view) of the Connection Expert window. Click the
Change
Properties... button in the property pane to display the Agilent 82357 Interface
Converter dialog box. Choose the settings you want and then click OK .
Clicking Cancel will cause the configuration set in the preceding dialog box
to be used..
NOTE
Although you can change the Logical Unit (LU) and GPIB Address values
for an 82357A, this is generally not necessary and may cause running
applications to fail or to stop running.