IEI Integration PPC-5152-D525 v1.02 - Manual (Page 77)

PPC-5152-D525 Falt-bezel Panel PC
Page 63
Step 7: Grasp the WLAN card by the edges and carefully pull it out of the socket
(
6
Figureٛ 4-5 ).
Figureٛ 4-5: Removing the WLAN card
Step 8: Install a new WLAN card by inserting the card into the slot at an angle
Step 9: Push the WLAN card down until the spring retainer clips lock into place.
Step 10: Connect the main (1) and auxiliary (2) antennas. The main antenna is indicated
with a strip of black electrical tape. See
6
Figureٛ 4-6 .
NOTE:
To ensure the WLAN module functions correctly, please make sure the
WLAN antennas are attached in the proper configuration.