B.2.5 create factory default image, Figure b-10: press f3 to boot into recovery mode, Figure b-11: recovery tool menu – IEI Integration PPC-5152-D525 v1.02 User Manual

Page 143: B.2.5

PPC-5152-D525 Falt-bezel Panel PC

Page 129

B.2.5 Create Factory Default Image

NOTE:

Before creating the factory default image, please configure the system

to a factory default environment, including driver and application

installations.

To create a factory default image, please follow the steps below.

Step 1:

Turn on the system. When the following screen displays (Figure B-10), press

the <F3> key to access the recovery tool. The message will display for 10

seconds, please press F3 before the system boots into the operating system.

Figure B-10: Press F3 to Boot into Recovery Mode

Step 2:

The recovery tool menu appears. Type <4> and press <Enter>. (Figure B-11)

Figure B-11: Recovery Tool Menu

Step 3:

The About Symantec Ghost window appears. Click OK button to continue.