IEI Integration PPC-5152-D525 v1.02 - Manual (Page 66)

PPC-5152-D525 Falt-bezel Panel PC
Page 52
Pin Description Pin Description
1 VCC 5 VCC
2 DATA- 6 DATA-
3 DATA+ 7 DATA+
4 GROUND 8 GROUND
Table 3-8: USB 2.0 Port Pinouts
3.11.10 USB 3.0 Connectors
CN Label: USB3.0
CN Type: USB 3.0 port
CN Location: See
6
Figure 1-4
CN Pinouts: See
6
Table 3-8
The USB 3.0 ports are for attaching USB 3.0 peripheral devices to the system. To be able
to use the USB 3.0 ports, please make sure the USB 3.0 function is enabled in BIOS (see
Section
6
5.3.4 ).
The pinouts of the USB 3.0 port is shown below.
Pin Description Pin Description
1 USB_3P0_VCC1 10 USB_3P0_VCC2
2 DATA1- 11 DATA2-
3 DATA1+ 12 DATA2+
4 GROUND 13 GROUND
5 RX1N 14 RX2N
6 RX1P 15 RX2P
7 GROUND 16 GROUND
8 TX1N 17 TX2N
9 TX1P 18 TX2P
Table 3-9: USB 3.0 Port Pinouts
To install a USB device, follow the steps below.