IEI Integration PPC-5152-D525 v1.02 - Manual (Page 69)

PPC-5152-D525 Falt-bezel Panel PC
Page 55
Figure 3-41: VGA Connector
3.12 Power-up the System
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
3.12.1 AT/ATX Power Mode Selection
The PPC-5152-D525 supports both AT and ATX power modes. The setting can be made
through the AT/ATX power mode switch on the bottom panel as shown below.
Figure 3-42: AT/ATX Power Mode Switch