1 unpacking, Npacking – IEI Integration PPC-5152-D525 v1.02 User Manual

Page 30

PPC-5152-D525 Falt-bezel Panel PC

Page 16

2.1 Unpacking

To unpack the flat panel PC, follow the steps below:

WARNING!

The front side LCD screen has a protective plastic cover stuck to the

screen. Only remove the plastic cover after the panel PC has been properly

installed. This ensures the screen is protected during the installation

process.

Step 1:

Use box cutters, a knife or a sharp pair of scissors that seals the top side of the

external (second) box.

Step 2:

Open the external (second) box.

Step 3:

Use box cutters, a knife or a sharp pair of scissors that seals the top side of the

internal (first) box.

Step 4:

Lift the monitor out of the boxes.

Step 5:

Remove both polystyrene ends, one from each side.

Step 6:

Pull the plastic cover off the panel PC.

Step 7:

Make sure all the components listed in the packing list are present.

Step 0: