5 clear cmos, 6 reset the system, Lear – IEI Integration TANK-600-D2550_N2600 User Manual

Page 30: Cmos, Eset the, Ystem, Figure 3-8: clear cmos switch location, Figure 3-9: reset button location, 5 cle a r cmos

TANK-600 Em b e d d e d S ys te m

P a g e 19

3.5 Cle a r CMOS

If the TANK-600 fails to boot due to improper BIOS settings, the clear CMOS switch clears

the CMOS data and resets the system BIOS information. To do this, adjust the clear

CMOS switch to clear CMOS mode for a few seconds then reinstall the clear CMOS

switch back to keep CMOS mode.

S te p 1:

Locate the clear CMOS switch on the bottom panel (Figure 3-8).

Figure 3-8: Clear CMOS Switch Location

S te p 2:

Adjust the clear CMOS switch.

S te p 0:

3.6 Re s e t th e S ys te m

The reset button enables user to reboot the system when the system is turned on. To

reboot the system, follow the steps below.

S te p 1:

Locate the reset button on the bottom panel (Figure 3-9).

Figure 3-9: Reset Button Location