IEI Integration WAFER-945GSE2 v1.03 - Manual (Page 111)

WAFER-945GSE2 User Manual
Page 94
Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and
Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts
impending drive failures. The S.M.A.R.T BIOS option enables or disables this function.
Auto D EFAULT BIOS auto detects HDD SMART support.
Disabled Prevents BIOS from using the HDD SMART feature.
Enabled Allows BIOS to use the HDD SMART feature
32Bit Data Transfer [Enabled]
Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers.
Disabled Prevents the BIOS from using 32-bit data transfers.
Enabled D EFAULT Allows BIOS to use 32-bit data transfers on supported
hard disk drives.
6.3.3 Super I/O Configuration
Use the Super I/O Configuration menu (
878H873H
BIOS Menu 6) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS Menu 6: Super I/O Configuration
Serial Port1 Address [3F8/IRQ4]