IEI Integration IMB-C2160 - Manual (Page 98)

IMB-C2160 Mic ro -ATX Mo th e rb o a rd
P a g e 83
5.3.9.1 S e ria l P o rt 7 Co n fig u ra tio n
 Serial Po rt [En ab led ]
Use the Serial Port option to enable or disable the serial port.

Disabled Disable the serial port

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=260h;
IRQ=11
Serial Port I/O port address is 260h and the interrupt
address is IRQ11

IO=260h;
IRQ=10, 11
Serial Port I/O port address is 260h and the interrupt
address is IRQ10, 11

IO=268h;
IRQ=10, 11
Serial Port I/O port address is 268h and the interrupt
address is IRQ10, 11
 Device Mo d e [No rm al]
Use the Device Mode option to change the serial port mode.

Serial Port
Function Mode
D EFAULT Enables the serial port to function in serial port
function mode.

IR Mode, Pusle
1.6us, Full Duplex
Enables the serial port to function in IR mode,
pulse 1.6 us at full duplex.

IR Mode, Pusle
1.6us, Half Duplex
Enables the serial port to function in IR mode,
pulse 1.6 us at half duplex.