IEI Integration IMB-C2160 - Manual (Page 104)

IMB-C2160 Mic ro -ATX Mo th e rb o a rd
P a g e 89

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=2A0h;
IRQ=10
Serial Port I/O port address is 2A0h and the interrupt
address is IRQ10

IO=2A0h;
IRQ=10, 11
Serial Port I/O port address is 2A0h and the interrupt
address is IRQ10, 11

IO=2E8h;
IRQ=10, 11
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ10, 11
5.3.10.1.4 S e ria l P o rt 4 Co n fig u ra tio n
 Serial Po rt [En ab led ]
Use the Serial Port option to enable or disable the serial port.

Disabled Disable the serial port

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.