3 ps/2 y-cable connection, Figure 4-15: lan connection – IEI Integration IMB-C2160 User Manual

Page 79

IMB-C2160 Mic ro -ATX Mo th e rb o a rd

P a g e 64

Figure 4-15: LAN Connection

S te p 3:

Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the on-board RJ-45 connector.

4.6.3 P S /2 Y-Ca b le Co n n e c tio n

The IMB-C2160 has a PS/2 connector on the external peripheral interface panel. The dual

PS/2 connector is connected to the PS/2 Y-cable that came with the IMB-C2160. One of

the PS/2 cables is connected to a keyboard and the other to a mouse to the system.

Follow the steps below to connect a keyboard and mouse to the IMB-C2160.

S te p 1:

Locate the dual PS/2 connector. The location of the PS/2 connector is shown

in Chapter 3.

S te p 2:

Insert the keyboard/mouse connector.

Insert the PS/2 connector on the end

of the PS/2 y-cable into the external PS/2 connector. See Figure 4-16.