beautypg.com

IEI Integration KINO-QM57A User Manual

Page 66

background image

KINO-QM57A Mini-ITX SBC

Page 52

Figure 4-3: Cooling Kit Support Bracket

Step 2:

Open the lever at the top of the heat sink. Lift the lever at the top of the

cooling kit to loosen the cooling kit clamps.

Step 3:

Secure the cooling kit. Gently place the heat sink and cooling kit onto the CPU.

Make sure the hooks are properly secured to the bracket. To secure the cooling

kit, close the top lever.

Step 4:

Connect the fan cable. Connect the cooling kit fan cable to the fan connector

on the KINO-QM57A. Carefully route the cable and avoid heat generating chips

and fan blades.

Step 0:

See also other documents in the category IEI Integration Hardware: