A.1 intel® amt setup procedure, A.2 intel® management engine bios extension, A.1 intel – IEI Integration KINO-QM57A User Manual

Page 116: Amt setup procedure, A.2 intel, Management engine bios extension

KINO-QM57A Mini-ITX SBC

Page 102

A.1 Intel

AMT Setup Procedure

The KINO-QM57A is featured with the Intel® Active Management Technology (AMT) 6.0.

To enable the Intel® AMT function, follow the steps below.

Step 1:

Make sure the DIMM1 socket is installed with one DDR3 SO-DIMM.

Step 2:

Connect an Ethernet cable to the RJ-45 connector labeled LAN2_USB2.

Step 3:

The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,

including:

AMT Configuration [Advanced]

ME Subsystem [Chipset]

Step 4:

Configure the Intel® Management Engine BIOS extension (MEBx) (see

Section A.2 below)

Step 5:

The following dialog window is displayed after the OS is loaded to show the

Intel® AMT status on the KINO-QM57A is enabled.

Figure A-1: Intel® Active Management Technology Status Dialog

A.2 Intel

Management Engine BIOS Extension

This section describes the essential steps for using the Intel® Management Engine BIOS

extension (MEBx).

Step 1:

A screen prompts the user to press after a single beep during boot-up

process. To get into the Intel® MEBx settings, press .