IEI Integration PCISA-945GSE v1.01 - Manual (Page 90)

PCISA-945GSE CPU Card
Page 72
5.6.5 LCD Panel Type Selection
Jumper Label: J_LCD_TYPE1
Jumper Type: 6-pin header
Jumper Settings: See Table 5-6
Jumper Location: See Figure 5-3
The LCD Panel Type Selection jumper allows the LVDS screen voltage to be set. The
LCD Panel Type Selection jumper settings are shown in Table 5-7.
LCD Panel
Selection
Description
Open 640 x 480 (18-bit)
1-2 800 x 480 (18-bit)
3-4 800 x 600 (18-bit)
1-2 and 3-4 1024 x 768 (18-bit)
5-6 1280 x 1024 (36-bit)
1-2 and 5-6 1400 x 1050 (36-bit)
3-5 and 5-6 1400 x 900 (36-bit)
1-2, 3-4 and 5-6 1600 x 1200 (36-bit)
Table 5-6: LCD Panel Type Selection Jumper Settings
5.6.6 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and PCISA-945GSE may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that came with the monitor to select the correct voltage.
Jumper Label: J_VLVDS1
Jumper Type: 3-pin header