IEI Integration PCISA-945GSE v1.01 - Manual (Page 103)

PCISA-945GSE CPU Card
Page 85
Figure 5-13: Connect the LPT Device
5.9 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
ƒ RJ-45 Ethernet cable connectors
ƒ PS/2 devices
ƒ Serial port devices
ƒ USB devices
ƒ VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding PCISA-945GSE external peripheral interface connector
making sure the pins are properly aligned.
5.9.1 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1: Locate the RJ-45 connectors. The locations of the LAN connectors are shown
in Chapter 4.