4 sata controller, 5 usb controller, 6 ite it8718f super i/o chipset – IEI Integration PCISA-945GSE v1.01 User Manual
Page 37
PCISA-945GSE CPU Card
Page 19
2.5.4 SATA Controller
The integrated SATA controller on the Intel® ICH7M Southbridge supports two SATA
drives with independent DMA operations. Two SATA controllers are connected to two
SATA connectors on the PCISA-945GSE. SATA controller specifications are listed below.
Supports two SATA drives
Supports 1.5 Gb/s data transfer speeds
Supports Serial ATA Specification, Revision 1.0a
2.5.5 USB Controller
Up to six high-speed, full-speed or low-speed USB devices are supported by the Intel®
ICH7M on the PCISA-945GSE. High-speed USB 2.0, with data transfers of up to
480 MB/s, is enabled with the Intel® ICH7M integrated Enhanced Host Controller
Interface (EHCI) compliant host controller. USB full-speed and low-speed signaling is
supported by the Intel® ICH7M integrated Universal Host Controller Interface (UHCI)
controllers.
The six USB ports implemented on the PCISA-945GSE are connected to four internal
connectors (on two headers) and two external connectors.
2.5.6 iTE IT8718F Super I/O chipset
The iTE IT8718F Super I/O chipset is connected to the Intel® ICH7M Southbridge through
the LPC bus. The iTE IT8718F is an LPC interface-based Super I/O device that comes
with Environment Controller integration.