IEI Integration PCISA-945GSE v1.10 - Manual (Page 75)

PCISA-945GSE CPU Card
Page 57
Quantity Type
1 USB cable
Table 4-8: IEI Provided Cables
Some optional items that can be purchased separately and installed on the
PCISA-945GSE include:
ƒ 5.1 channel audio kit
ƒ 7.1 channel audio kit
ƒ ATX power cable
ƒ Dual port USB cable
ƒ Dual serial port cable
ƒ IDE cable
ƒ HDTV out cable
4.9.1 5.1 Channel Audio Kit Installation
NOTE:
This is an optional item that must be ordered separately. For further
information please contact the nearest PCISA-945GSE distributor,
reseller or vendor or contact an iEi sales representative directly. Send
any queries to [email protected] .
The optional 5.1 channel audio kit connects to the 10-pin audio connector on the
PCISA-945GSE. The audio kit consists of three audio jacks. One audio jack, Mic In,
connects to a microphone. The remaining two audio jacks, Line-In and Line-Out, connect
to two speakers. To install the audio kit, please refer to the steps below:
Step 4: Connect the audio kit cable. The audio kit is shipped with a cable that
connects the audio kit to the PCISA-945GSE. Connect the cable to the
connector on the back of the audio kit. Make sure the pins are properly aligned
(i.e. pin 1 connects to pin 1).