Figure 4-22: iei iman web address – IEI Integration PCIE-Q870-i2 User Manual

Page 86

PCIE-Q870-i2 PICMG 1.3 CPU Card

Page 69

obtain IP address, follow the steps below:

a. Copy the Ipmitool.exe file to a bootable USB flash drive.

b. Insert the USB flash drive to the PCIE-Q870-i2

c. The PCIE-Q870-i2 boots from the USB flash drive

d. Enter the following command: ipmitool 20 30 02 01 03 00 00

(there is a space between each two-digit number)

e. A serial of number shows. The last four two-digit hexadecimal numbers are

the IP address. Convert the hexadecimal numbers to decimal numbers.

Step 2:

On the remote management console, open a web browser. Enter the managed

system IP address in the web browser (Figure 4-22).

Figure 4-22: IEI iMAN Web Address

Step 3:

The login page appears in the web browser.

Step 4:

Enter the user name and password to login the system. The default login

username and password are:

-Username: admin

-Password: admin

Step 5:

Press the login button to login the system.

Step 6:

The IEI iMAN Web Interface appears.