IEI Integration PCIE-Q870-i2 - Manual (Page 75)

PCIE-Q870-i2 PICMG 1.3 CPU Card
Page 58
Step 2: Insert the cable connectors. Insert one connector into each serial port box
headers (Figure 4-11). A key on the front of the cable connectors ensures the
connector can only be installed in one direction.
Figure 4-11: Dual RS-232 Cable Installation
Step 3: Secure the bracket. The dual RS-232 connector has two D-sub 9 male
connectors secured on a bracket. To secure the bracket to the chassis please
refer to the reference material that came with the chassis.
4.5.2 iRIS Module Installation
WARNING:
The iRIS module slot is designed to install the iRIS-2400 module only.
DO NOT install other modules into the iRIS module slot. Doing so may
cause damage to the PCIE-Q870-i2.
To install the iRIS-2400 module, please follow the steps below and refer to Figure 4-12.