Figure b-22: auto recovery utility, Figure b-23: disable automatically restart – IEI Integration PCIE-Q870-i2 User Manual

Page 176

PCIE-Q870-i2 PICMG 1.3 CPU Card

Page 159

Step 1:

Follow the steps described in Section B.2.1 ~ Section B.2.3 to setup BIOS,

create partitions and install operating system.

Step 2:

Install the auto recovery utility into the system by double clicking the

Utility/AUTORECOVERY-SETUP.exe in the One Key Recovery CD. This utility

MUST be installed in the system, otherwise, the system will automatically

restore from the factory default image every ten (10) minutes.

Figure B-22: Auto Recovery Utility

Step 3:

Disable the automatically restart function before creating the factory

default image. Go to: My Computer

Æ Properties Æ Advanced. Click the

Settings button of Startup and Recovery. Deselect “Automatically restart”. Click

OK to save the settings and exit. (See Figure B-23)

Figure B-23: Disable Automatically Restart