1 socket lga1150 cpu installation, Figure 4-1: disengage the cpu socket load lever – IEI Integration PCIE-Q870-i2 User Manual

Page 65

PCIE-Q870-i2 PICMG 1.3 CPU Card

Page 48

4.2.1 Socket LGA1150 CPU Installation

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

is installed properly and ensure the correct cooling kit is properly

installed.

DO NOT touch the pins at the bottom of the CPU. When handling the

CPU, only hold it on the sides.

To install the CPU, follow the steps below.

Step 1:

Disengage the load lever by pressing the lever down and slightly outward to

clear the retention tab. Fully open the lever. See Figure 4-1.

Figure 4-1: Disengage the CPU Socket Load Lever

Step 2:

Open the socket and remove the protective cover. The black protective

cover can be removed by pulling up on the tab labeled "Remove". See

Figure 4-2.