2 usb device connection (single connector), Figure 4-19: lan connection – IEI Integration PCIE-Q870-i2 User Manual

Page 82

PCIE-Q870-i2 PICMG 1.3 CPU Card

Page 65

Figure 4-19: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the on-board RJ-45 connector.

Step 0:

4.6.2 USB Device Connection (Single Connector)

There are two external USB 3.0 connectors. Both connectors are perpendicular to the

PCIE-Q870-i2. To connect a USB device, please follow the instructions below.

Step 1:

Located the USB connectors. The locations of the USB connectors are shown

in Chapter 3.

Step 2:

Align the connectors. Align the USB device connector with one of the

connectors on the PCIE-Q870-i2. See Figure 4-20.