IEI Integration PCIE-Q870-i2 User Manual
Page 114
PCIE-Q870-i2 PICMG 1.3 CPU Card
Page 97
Î
VT-UTF8
The target terminal type is VT-UTF8
Î
ANSI D
EFAULT
The target terminal type is ANSI
Î Bits per second [115200]
Use the Bits per second option to specify the serial port transmission speed. The speed
must match the other side. Long or noisy lines may require lower speeds.
Î
9600
Sets the serial port transmission speed at 9600.
Î
19200
Sets the serial port transmission speed at 19200.
Î
57600
Sets the serial port transmission speed at 57600.
Î
115200 D
EFAULT
Sets the serial port transmission speed at 115200.
Î Data Bits [8]
Use the Data Bits option to specify the number of data bits.
Î
7 Sets the data bits at 7.
Î
8 D
EFAULT
Sets the data bits at 8.
Î Parity [None]
Use the Parity option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.
Î
None D
EFAULT
No parity bit is sent with the data bits.
Î
Even
The parity bit is 0 if the number of ones in the data
bits is even.
Î
Odd
The parity bit is 0 if the number of ones in the data
bits is odd.
Î
Mark
The parity bit is always 1. This option does not
provide error detection.
Î
Space
The parity bit is always 0. This option does not
provide error detection.