IEI Integration ROCKY-3786 v4.0 - Manual (Page 83)

0-83
ROCKY-3786EV CPU Card
83
4.4 Chassis Installation
The CPU card can be mounted into a chassis only after the CPU, the cooling kit, and the
DIMM module have been installed, the internal peripheral connectors have been
connected to the peripheral devices and the jumpers have been configured.
Refer to the chassis user guide for instructions on how to mount the CPU card into a
chassis.
4.5 Rear Panel Connectors
4.5.1 Ethernet Connection
The rear panel RJ-45 connectors can be connected to an external LAN and communicate
with data transfer rates up to 1Gb/s.
4.5.2 Keyboard and Mouse Connection
A PS/2 keyboard and a PS/2 mouse can be connected to the appropriate PS/2 connector
on the rear panel.
4.5.3 VGA Connection
The conventional CRT monitor connector (CN11) is a 15-pin, female D-SUB connector. It
can be connected to an external monitor.