IEI Integration ROCKY-3786 v4.0 - Manual (Page 106)

106
IEI ® Technology, Corp.
AGP Graphics Aperture Size
Use the AGP Graphics Aperture Size option to select the size of the AGP aperture. The
aperture is a portion of the PCI memory address range dedicated for graphics memory
address space. Host cycles that hit the aperture range are forwarded to the AGP without
any translation. AGP Graphics Aperture Size configuration options are:
64M
32M
Power Supply Type [ATX]
Use the Power Supply Type option to specify whether an AT or ATX power supply is
connected to the system.
AT An AT power supply is used.
ATX (Default) An ATX power supply is used.
Special NT4.0 DRAM Report [Disabled]
Use the Special NT4.0 DRAM Report option to fix Windows NT4.0 can not find FDD if
511MB memory is installed (511MB Main Memory + 1M Shared Memory).
Disabled (Default) The Special NT4.0 DRAM Report function is disabled.
Enabled The Special NT4.0 DRAM Report function is enabled.
On-chip VGA [Enabled]
Use the On-Chip VGA option to specify if the system uses the integrated VGA channel or
not.
Disabled The VGA channel is not used.
Enabled (Default) The VGA channel is used.