IEI Integration ROCKY-3786 v4.0 - Manual (Page 167)

0-16
7
ROCKY-3786EV CPU Card
167
OS. To do this, please refer to the documentation that came with the OS.
Step 0:
E.4 RAID Options:
E.4.1 Create RAID 0 Striping for Performance
WARNING!
All data previously stored on the member drives of a RAID configuration are
destroyed during the RAID initialization process. If “used” drives are used to
create a RAID array, make sure the data has been moved or backed up
before creating a RAID array out of the disk drives.
Step 1: Select “Create RAID 0 Striping for Performance”. Use the arrow keys to highlight
Create RAID0 Striping for Performance and press E NTER . A flashing ‘S’ appears
on the Drive Menu where the member drives to be included in the RAID 0 array
can be chosen.
Step 2: Select RAID array drive members. Use the space bar to select members of the
RAID array. The flashing cursor changes to a lower case ‘s’ once any of the
connected disk drives has been selected. Follow the same method to select
another member drive.
Step 3: Confirm. The Create RAID0(Y/N) confirm box appears. Press Y.
Step 4: Name the array. Enter a nickname for the created array. Upper and lower case
alphabetic, numeric, space, and underscore characters are all applicable for
naming an array. Step 0:
NOTE:
1. To reduce the chance of losing data, ALi imposes certain limitations on the
RAID configuration options. PATA drives connected on the same IDE
channel cannot be selected as the members of a RAID 0 array. Avoid